Filter products

SINAMICS V90 PROFINET

SINAMICS V90 PROFINET

SINAMCIS V90 servo drive system is now available with PROFINET (PN) interface, the Ethernet standard for Motion control.

• With immediate effect, we announce that the SINAMICS V90 servo system with PROFINET (PN) interface 1/3 AC 200 V to 240 V variants has been released for sales.

• SINAMICS V90 PROFINET (PN) 3 AC 380 V to 480 V variants are scheduled for sales release at the end of June 2016.


SINAMICS V90 PROFINET (PN) version has 2 RJ45 sockets for PROFINET communication to link the drive to a motion control system via PROFIdrive profile. This makes SINAMICS V90 easily to integrate into SIMATIC control system with PROFINET interface and offers wide-ranging functions with reduced complexity.


SINAMCIS V90 PROFINET (PN) version is also integrated in the upcoming TIA Portal V14 via HSP together with new S7 1500 T-CPU Advanced Controller. The package enables users to solve advanced motion control tasks, such as gearing and camming, in a familiar environment.


In addition, the servo drive system is also suitable for use with the standard SIMATIC S7-1500 Controller and the SIMATIC S7-1200 Basic Controller.


An overview of the technical data

SINAMICS V90 servo drive system 1/3 AC 200 V to 240 V Low Inertia for high dynamic performance 

Line supply and power

1AC 200 V to 240 V (-15%/10%), 0.05 kW to 0.75 kW

3AC 200 V to 240 V (-15%/10%), 0.05 kW to 2 kW

Control mode

Speed control mode: position and speed  control in combination with a motion function (TO axis) of SIMATIC S7-1500 / S7-1200

Communication

PROFINET

Degree of protection

IP20

Servo motor

SIMOTICS S-1FL6 low inertia motor, shaft height 20mm,30mm,40mm

 

SINAMICS V90 servo drive system 3 AC 380 V to 480 V High Inertia for smooth operational performance

Line supply and power

3AC 380 V to 480 V (-15%/10%), 0,4 kW to 7 kW

Control mode

Speed control mode: position and speed  control in combination with a motion function (TO axis) of SIMATIC S7-1500 / S7-1200

Communication

PROFINET

Degree of protection

IP20

Servo motor

SIMOTICS S-1FL6 High inertia motor, shaft height 45mm, 65mm, 95mm

 
Important notice/restriction

  • De-control positioning (IPos- positioning in drive for point-to-point positioning) is NOT supported by this Firmware version, that means Function Block SINA_POS (positioning) in SIMATIC controller is NOT supported, only Function Block SINA_SPEED (speed) is supported. The function is planned to release with a Firmware updated approximately in Oct.2016.

  • SINAMICS V90 PN supports Technology Object (TO) of SIMATIC PLC for central position control and speed control, e.g. S7-1500 T-CPU, S7-1500, and S7-1200. The motion functionality is scaled from the controller side, for example S7-1500 T-CPU supports the Cam TO and synchronous operation but S7-1500 not. S7-1200 only supports TO positioning without synchronization.

  • The machine dynamic is impacted by the ratio of load - to - motor inertia as well, greater than 5:1 ratio is NOT recommended for the application requiring high dynamic. For very low speed, high accuracy or high dynamic application TTL encoder is not recommended.

  • SINAMICS V90 PN version is a separate version compared to existing SINAMCIS V90 pulse train version (PTI version offers  pulse/direction, analog, USS/Modbus RTU)

Additional advantages

Integrated PROFINET - the industrial Ethernet standard for automation

SINAMICS V90 PN version features a PROFINET interface, enabling real-time transmission of user/ process data and diagnostic data with a single cable. This solution offers wide-ranging functions with reduced complexity.

Brochures

Did you know, we are an entrusted Siemens approved partner?

Loading...