Overview
The Anybus Wireless Bolt IoT gives devices, machines and equipment an Internet connection. This solution uses the latest LTE standards NB-IoT and CAT-M1 and fits both stationary and mobile equipment. These new LTE standards are so called LP-WAN technologies (Low Power Wide Area Network) adapted for the new IoT use cases. This means Low Power consumption, Low Bandwidth (25-300 kbit/s), Good geographical coverage and Lower Cost.
The innovative hardware form-factor with its M50 throughhole mount enables effective access to good cellular connectivity, without losing coverage due to long and lossy antenna cable. The Bolt IoT is up-to-date with the latest 4G LTE standards NB-IoT and CAT-M1 and, to be globally effective, it uses 2G (GPRS/EDGE) fallback enabling deployment almost anywhere in the world.
Features and benefits
- Intuitive and interesting form-factor; M50 through-hole mount on any flat surface
- World-wide coverage on a single module with industry and mobile network certifications
- LPWA Global 13 band LTE NB-IoT, LTE CAT-M1 and GPRS/EDGE failback
- Ultra-Low Power Mode; Reduce power consumption for battery or solar/wind powered applications
- Host interface RJ45 with 10/100 Mbit/s Ethernet
- PoE (Power over Ethernet) option, single cable with both power and communication
- Transparent transfer of any TCP/UDP based protocol
- Built-in firewall, NAT and DHCP server
- Nano SIM-card slot.
Technical Specifications
Cellular standards
| 4G LTE: Category Cat-M1 and NB-IoT. Frequency Bands B1, B2, B3, B4, B5, B8, B12, B13, B17, B18, B19, B20, B26, B28 2G: EDGE, GPRS bands 850, 900, 1800, 1900 |
Host interface | RJ45 Ethernet 10/100 Mbit/s
|
Data speeds
| Peak Download Rate Cat-M1: 300kbps, NB-IoT: 27kbps, 2G/EDGE: 200kbps Peak Upload Rate Cat-M1: 375kbps, NB-IoT: 65kbps, 2G/EDGE: 200kbps |
Latency
| CAT-M1: 10ms–15ms NB-IoT: 1.6s–10s 2G/GPRS/EDGE: 700ms–2s |
Power consumption | 11-33 VDC, PoE (Power over Ethernet) PD according to IEEE 802.3af. Redundant or separate operation of PoE and screw terminals for increased robustness. Power Consumption: Sleep Mode: DC terminal 0,1W. PoE 0,3W Idle Mode: DC terminal 0,6W. PoE 0,8W Worst Case (GPRS/2G): DC terminal 3,2W. PoE 3,6W. Peak current: 1.2A@11VDC |
Weight | 95g |
Connectors | RJ45 Ethernet/PoE, 3-pin screw connector for power
|
Housing material | Top: Valox 357X(f1) PBT/PC. Suitable for outdoor use with respect to exposure to ultraviolet light, water exposure and immersion in accordance with UL 746C. Base: Celanex: XFR 6840 GF15. PBT glass reinforced plastic. |
IP protection class | IP66, IP67 and UL NEMA 4X for top (outside the host), IP21 for base (inside the host)
|
Dimensions | Diameter: 68 mm. Overall height: 75 mm without DC-connector, 84 mm incl. PS-connector. Height aove mounting surface: 41 mm.
|
Mounting
| M50 screw and nut (50.5 mm hole needed)
|
Configuration | Two different methods: 1. Accessing the built-in web pages via Ethernet. 2. Sending REST-commands via Ethernet.
|
Vibration compatibility | Sinosodial vibration test according to IEC 60068-2-6:2007 and with extra severities;
Number of axes: 3 mutually perpendicular (X:Y:Z) Duration: 10 sweep cycles in each axes, Velocity: 1 oct/min, Mode: in operation, Frequency: 5-500 Hz, Displacement ±3.5 mm, Acceleration: 2g. Shock test according to IEC 60068-2-27:2008 and with extra severities; Wave shape: half sine, Number of shocks: ±3 in each axes, Mode: In operation, Axes ± X,Y,Z, Acceleration: 30 m/s2 , Duration: 11 ms. |
Humidity compatibility | EN 600068-2-78: Damp heat, +40°C, 90% (non condensing).
|
Certifications | CE/RED, FCC/IC, GCF and PTCRB, UL 62368/UL 60950 UL file E214107 |
Order Codes | AWB1000 (Anybus Wireless Bolt IoT black) AWB1001 (Anybus Wireless Sunbolt IoT white top and black base) |
Ordering information
Order Codes
AWB1000 (Black top), AWB1001 (White top)
Included Components
- 3-pin power screw connector.
- Quickstart Guide.
- Safety & Compliance sheet.
Accesories
- 024707 – Power Supply 90-264 VAC to 24VDC 19W world socket kit, 1,4 meter cable and 3-pole Bolt power connector.
- AWB4005 – Anybus PoE injector 100-240VAC. 35W incl. world power cable
- AWB4006 – Anybus PoE injector 12-57VDC. 30W, dual PoE ports
Warranty
3 years
Build innovative machines faster without costly prototyping with Efficient Motion Control.
With Effective Motion Control, machine builders can easily overcome major challenges and enable faster time-to-market, increased functionality, resolve complex system requirements, and demands for safety and sustainability.
We are Siemens trusted and approved distribution partner.
As a Value Added Reseller in Siemens’ Approved Partner network, Parmley Graham is a proven supplier of a wide range of quality products in the UK and globally.
Find out more how this will benefit you or check Siemens Configurator.
