For all water applications.
The SITRANS FMS500 sensor with hard rubber NBR and EPDM liners is designed for any water application.
The SITRANS FMS500 Advantage
- Zero Up and Zero Down installation capabilities
- EPDM lining specifically for drinking water applications requiring special approvals
- NBR rubber liner for all water and wastewater applications
- Increased low flow accuracy for water leak detection
- Suitable for underground installation and permanent immersion (IP68) or underwater installation
- Integrated grounding electrodes – no grounding rings required for many applications
- Short delivery time
- Connected to the SITRANS FMT020 transmitter, it forms the magnetic flowmeter system SITRANS FM520:
- SENSORPROMTM Technology provides an automatic upload of start-up settings and calibration data for easy commissioning
- Plug & Play – allows easy on-site replacement and commissioning of the transmitter in just a few minutes
- Mounting flexibility – compact or remote installation possible
- Validated calibration ensures accurate flow measurement. Each Siemens flowmeter is calibrated in facilities that are individually accredited to ISO / IEC 17025.
- Service and diagnostics – Designed to allow in-situ verification for easy performance check
Technical Specifications
SITRANS FMS500 | |
|---|---|
Measuring Range | 0 to 10 m/s |
Nominal sizes | From DN 15 to DN 1200 (1/2″ to 48″)
|
Accuracy | Standard 0.4% of rate, option for 0.2% of rate
|
Operating pressure | Max. 40 bar (Max. 580 psi) (dependent on sensor size)
|
Ambient temperature | –20 to 70 °C (-40 to 158 °F)
|
Medium temperature | -10 to 70 °C (14 to 158 °F)
|
Liners | EPDM, NBR |
Electrodes | Hastelloy C-276 Built-in grounding electrodes |
Material | Carbon steel, with corrosion resistant two-component epoxy coating |
Drinking water approvals | EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, AS/NZS 4020, GB/T 5750, ACS and BelgAqua
Ebonite: WRAS
|
Build innovative machines faster without costly prototyping with Efficient Motion Control.
With Effective Motion Control, machine builders can easily overcome major challenges and enable faster time-to-market, increased functionality, resolve complex system requirements, and demands for safety and sustainability.
We are Siemens trusted and approved distribution partner.
As a Value Added Reseller in Siemens’ Approved Partner network, Parmley Graham is a proven supplier of a wide range of quality products in the UK and globally.
Find out more how this will benefit you or check Siemens Configurator.
