Positioning Systems

Positioning Systems


Pepperl+Fuchs uses different technologies to provide industrial positioning systems for virtually any positioning task.


The range includes:

  • Inductive Positioning Systems
  • Distance Measurement Sensors
  • Position Encoding System WCS
  • Data Matrix Positioning System PCV
  • Position Guided Vision PGV
  • Electronic CAM-Switch Controller PAX


Inductive Positioning Systems

Various industrial positioning systems for high precision detection of linear movements and rotations are available. Inductive positioning systems are resistant to external contamination.

 

Distance Measurement Sensors

Distance measurement sensors from Pepperl+Fuchs use the optical concept of Pulse Ranging Technology (PRT). With modern PRT, distances to 300 m with accuracies of 0.1 mm are easily achieved.

 

Position Encoding System WC

For positioning over longer travel paths, the position encoding system WCS excels in systems with curves, switchpoints, inclines, or declines. With measurement lengths to 327 m, WCS is suitable for position detection in warehousing, material handling, and automated conveyor systems, crane positioning, elevators, and much more.

 

Data Matrix Positioning System PCV

The Data Matrix Positioning System uses Data Matrix codes, which are arranged side by side on a code reel as an information carrier. The reading head, based on modern camera technology, captures these two-dimensional codes and evaluates the exact position in X- and Y directions - up to 10,000 meters.

 

Position Guided Vision PGV

The versatile PGV camera simultaneously scans and processes data from three different floor-mounted initiators: the solid travel path navigation stripe, the high-resolution absolute positional band, and the decision-initiating control code (identification) segments.

Turns, stops, and starts are among many actions initiated by 15 mm x 15 mm data matrix control code squares that are also installed alongside the tracking strips.

 

Electronic CAM-Switch Controller PAX

PAX is a non-contact electronic CAM-Switch Controller and is used with the PMI inductive angle sensor. Easily capture machine shaft position without expensive, time-consuming mechanical cams! Configure up to 14 switch outputs and 6 analog outputs via the intuitive, integrated software.

Inductive Position Measuring Systems (PMI)
Shop Now
Distance Sensors
Shop Now
Position Encoding System WCS
Shop Now
Data Matrix Positioning System (PXV, safePXV)
Shop Now
Position Guided Vision (PGV, safePGV)
Shop Now
Inclination and Acceleration Sensors
Shop Now

Did you know, we are an entrusted Siemens approved partner?

Loading...